Fiber cabling with PoE for long-distance IP camera installation

Fiber optic cabling with PoE converters allows long-distance IP camera placement

Power over Ethernet (PoE) technology enables powering IP surveillance cameras through the transfer of DC electrical power along with data over standard unshielded twisted pair (UTP) cabling. This cabling connects to a network device through an RJ-45 port that injects the power from power sourcing equipment such as a PoE switch or midspan PoE injector. PoE provides a flexible and convenient means of powering devices that are located in out-of-the-way locations, and saves money by eliminating the expense and difficulty of direct electrical wiring. A challenge with PoE is reaching remote locations outside the distance limitation of UTP cabling. According to the TIA/EIA 568-5-A standard for category 5e cable, the maximum length for a cable segment is 100 meters (328 ft), and PoE power injectors or midspans do not increase the distance of the data link.

So, how do you get beyond that 100-meter limit? Once answer is through fiber optics. Fiber optic cabling is an effective method to overcome the distance and bandwidth limitations of UTP, and media converters are a commonly used to integrate copper network equipment and fiber. Since DC power cannot be conducted over fiber, PoE media converters are the solution to extend network distances via fiber to remote IP cameras. A PoE media converter converts the fiber to copper, and sends DC power to the camera over the UTP cabling.

How PoE Media Converters Work

On the main article image/PoE schematic that appears at right, an Ethernet switch with RJ-45 ports resides in a control room or data closet. The copper UTP cabling is converted to fiber with a standard media converter. The fiber is run a long distance to the PoE media converter located near a convenient AC or DC power source, where it converts the fiber back to copper UTP. The PoE media converter also functions as a power-sourcing mini switch, and injects PoE (DC power) over the UTP cable. At the other end of the UTP cable is the IP camera, located up to 100 meters away from the PoE media converter.

PoE media converters are available with Gigabit Ethernet and Fast Ethernet data rates and can support PoE (15.4 watts) or PoE+ (25.5 watts). PoE media converters function like PoE mini-switches, and are available in a variety of multi-port configurations, including dual RJ-45 and dual fiber ports. They can support fixed fiber connectors or small form pluggable transceivers.

To understand those power specifications, it’s worth knowing that in 2003, the IEEE ratified the 802.3af PoE Standard. That standard provides up to 15.4 watts of power per port. Late in 2009, the IEEE ratified the 802.3at PoE Standard known as PoE+ that provides up to 25.5 watts of power for each port. PoE+ can be required to power IP cameras with Pan-Tilt-Zoom (PTZ) capabilities, and weather-hardened cameras used in cold environments.

Key Features to Consider When Selecting a PoE Media Converter:

• PoE+ to future proof applications

• Out-of-the-box support for IEEE Alternative A and B, and Legacy Power detection

options (without the need for jumper wires or external cables)

• Jumbo Ethernet Frames to enhance throughput for reliable data flow

• Multiple port configurations for deploying a variety of architectures and topologies:

– Daisy chain media converters or install in ring topology

– Redundant fiber with less than 50ms switch over time

– Dual UTP ports for powering two PoE devices per converter

• Ability to be powered by either AC or DC power source

• Industrial hardened temperature ranges for outdoor applications

• Determines and delivers the specific power level required by the PD

• Fully configurable DIP-switches for easy set up:

– Link Fault Propagation Modes

– PoE Power Reset on fiber Rx loss that automatically resets

Leverage the Benefits of Fiber

There are several solutions available to extend the distances of PoE network links, including LAN extenders that convert Ethernet to DSL, UTP to coax converters and wireless technology. When you’re going long distance, however, fiber optic cabling provides several advantages over these technologies.

Unlike copper, fiber extends network distances up to 87 miles (140 kilometers) per link with no data deterioration over distance (signal deterioration is to be expected in copper cabling). LAN extenders can only extend network distances about 3,300 feet, but a data rate of 100 Mbps can drop by 70 percent at longer distances.

Fiber cabling provides security benefits as well. It is a secure medium that generates no electro-magnetic emission and is very difficult to tap. Fiber is also very reliable because it is not susceptible to electrical interference, or data loss due to temperature or atmospheric conditions.

【Installation Steps】

1) Please turn off the signal source and the device's power, installation with power on may damage the device;
2) Check if the network cable and other transmission line that will be used is occupied by other device;
3) Use a network cable to connect video to POE Ethernet Optical Transceiver's LAN port with PoE IP camera or other PoE network device;
4) Use two single mode double optical fibers to connect two converter's optical port, please attention the optical fiber which connect the RX and TX port should be across; that means one optical fiber, one side is to connect the optical module TX port, the other side should connect the RX port;
5) Check if the installation is correct and device is good, make sure all the connection is reliable and power up the system;
6) Make sure the Ethernet and PoE power supply is working normal.

Another Application:

Tukang Ngeblog | July 03, 2015 | Camera PoE, Fiber optic cabling with PoE, IP Camera, long-distance IP camera, PoE Media Converters Work, PoE+, UTP

Read More >>

1000BASE-TX over CAT 6

1000BASE-TX over Category 6

TIA/EIA-854 : A Full Duplex Ethernet Physical Layer Specification for 1000Mb/s operating over Category 6 Balanced Twisted Pair Cabling (1000BASE-TX).

This document specifies a full duplex Ethernet physical layer interface for 1000Mb/s operation over a 100 meters of a Category 6 twisted pair cabling channel, referred to as 1000BASE-TX.

The purpose of this document, 1000BASE-TX, is to provide an Ethernet physical layer specification that is low complexity and can easily be implemented by many vendors. This will take advantage of the improved transmission parameters provided by Category 6 cabling.

It was believed by the members of this project that a much simpler solution for data rates of 1000Mb/s operating over a 100 meters of Category 6 UTP cabling would be a benefit to users who migrate to the higher data rates. It would eliminate the complicated requirements in the 1000BASE-T standard of canceling the effects of crosstalk and return loss, providing a solution that could operate at a much lower power level, the potential for multiple ports per chip, and could be implemented at a lower cost.  As it turned out, the ports became cheap very quickly and so no hardware vendor adopted this standard.

ANSI decided not to adopt TIA/EIA-854. The IEEE also decided not to adopt this and keep with 1000BASE-T as in IEEE802.3ab.

Since there is no application for this limit and it was not adopted by either ANSI or IEEE, it is not in the DTX CableAnalyzer.

Tukang Ngeblog | January 10, 2015 | 1000 Base T., 1000Base Tx, CAT 6, EIA - 854, UTP

Read More >>

Twisted Pair Cabling Connection Tips

Twisted Pair Cabling Connection Tips

 1. Recommend to use UY connectors for cable connection or soldering by parallel (as Picture.) Do not bent it for 90° (as Picture) to avoid any impendence not matching problem (Interference).

2. After cable connection, the cable joint point must be twisted back for same pair; the untwisted length must be less 10mm to avoid any interference.

3. After finish the joint cable, must be do “waterproof work” to avoid any oxidation after long time use, affect any picture quality.

4. Do not bend CAT 5 twisted pair during the cabling. To make angle less than 90° to avoid any impendence not matching problem. (Interference).

5. If your budget acceptable, then not use all 4 pairs for transmission. Leave one pairs as spare cable for any future added camera or help to resolve interference cable.

6. Do not put the remaining cable like a circle (as Picture) and not near any power box, transformers, motor, Fluorescent Lights. This way could avoid any interference caused.

Tukang Ngeblog | June 26, 2014 | blog, CAT 2, CAT 3, Cat 5, CAT 6, Cat 6 UTP cable, Twisted Pair Cabling, UTP

Read More >>

Fiber media converters For Video Surveillance Cameras

As a kind of Media Converter, Fiber media converters this known as fiber transceivers or Ethernet media converters, are quite obvious networking devices those make it possible for connecting two dissimilar media types such as twisted pair Cat-5 or Cat-6 cable with fiber optic cabling. They may be essential in interconnecting fiber optic cabling-based systems with existing copper-based, structured cabling systems. Fiber ethernet media converters support many different communication protocols including Ethernet, Fast Ethernet, Gigabit Ethernet, as well as multiple cabling types such as twisted pair, multi-mode and single-mode fiber optics. Fiber media converters can connect different Local area network (LAN) media, modifying duplex and speed settings.

For video security and surveillance professionals, analog video-based CCTV systems have been the tried-and-true technology for many years. However, these same professionals are the first to recognize the migration of Ethernet into new applications beyond the typical office LAN and how Ethernet is playing a role and introducing new challenges to video security networking.

For years, Transition Networks has been talking about the benefit of fiber optic cabling and how media converters can provide a cost effective method of deploying fiber in local area networks and overcome the limitations and drawbacks of copper UTP cabling. These same benefits can be realized by security and surveillance professionals when they integrate fiber into their video networks.

For example, switching media converters can connect legacy 10BASE-T network segments to more modern 100BASE-TX or 100BASE-FX Fast Ethernet infrastructure. For instance, existing Half-Duplex hubs may be attached to 100BASE-TX Fast Ethernet network segments over 100BASE-FX fiber. When expanding the reach with the LAN to span multiple locations, fiber transceivers are useful in connecting multiple LANs to form one large campus area network that spans more than a wide geographic area.

Fiber media converters support a variety of data communication protocols including Ethernet, Fast Ethernet, Gigabit Ethernet, T1/E1/J1, DS3/E3, as well as multiple cabling types for example coax, twisted pair, multi-mode and single-mode fiber optics. Media Converter types range from small standalone devices and PC card converters to high port-density chassis systems offering many advanced features for network management.

On some devices, Simple Network Management Protocol (SNMP) enables proactive management of link status, monitoring chassis environmental statistics and sending traps to network managers in case of a fiber break or perhaps link loss on the copper port.

 

Fiber media converters can connect different Local area network (LAN) media, modifying duplex and speed settings. Switching media converters can connect legacy 10BASE-T network segments to more recent 100BASE-TX or 100BASE-FX Fast Ethernet infrastructure. For instance, existing Half-Duplex hubs can be linked to 100BASE-TX Fast Ethernet network segments over 100BASE-FX fiber.

When expanding the reach of the LAN to span multiple locations, media converters are of help in connecting multiple LANs to make one large campus area network that spans more than a limited geographic area. As premises networks are primarily copper-based, media converters can extend the reach from the LAN over single-mode fiber approximately 130 kilometers with 1550 nm optics.

The coaxial cabling utilized in analog CCTV networks suffers from transmission distance issues. The accepted distance for coax is 185 meters. While this has worked well in the past, the demands for increasing the surveillance coverage have pushed camera locations beyond the standard distances.

As for Ethernet and IP cameras, this distance is even more restrictive at 100 meters. Offering transmission over greater distances, fiber cabling is starting to play a signifigant role in surveillance networks. Fiber cabling supports transmission distances up to 2km on multimode fiber without the need for repeaters or signal boosters - with even greater distances available on single mode fiber.

Indoor applications with florescent lights, electric motors, and other sources of electromagnetic interference (EMI) along with sources of radio frequency interference (RFI) can cause disruptions and poor picture quality issues for video over Coax and UTP cabling. The transmission from cameras located outdoors is susceptible to these same conditions as well as the effect from electrical/lightening storms. Due to the nature of how data is transmitted over fiber optic cabling, it does an excellent job of blocking

this electrical interference and protecting the quality of the data.

Wavelength-division multiplexing (WDM) technology in the LAN is very beneficial in situations where fiber is at limited supply or expensive for provision. In addition to conventional dual strand fiber converters, with separate receive and transmit ports, there are also single strand fiber converters, which can extend full-duplex data transmission approximately 70 kilometers more than one optical fiber.

Other benefits of media conversion include providing a gentle migration path from copper to fiber. Fiber connections can help to eliminate electromagnetic interference. Also fiber media converters pose being a cheap solution for many who need it switches for use with fiber along with have enough money to pay for them, they can buy ordinary switches and make use of fiber media converters to make use of making use of their fiber network.

As a fiber optic media converter, you can use it anywhere in the network to integrate newer technology with existing equipment to support new applications, technologies and future growth. Fiber Converters are key aspects of Optical Networking because its long distance operation, high bandwidth capacity and reliablity make fiber optics probably the most desired channel for data communications. Instead of costly, across-the-board upgrades, media converters can extend the productive lifetime of the existing cabling along with the active equipment. FiberStore offers a wide variety of professional fiber optic media converters for Fast Ethernet, Gigabit Ethernet, Serial Datacom interfaces and E1 or T1 voice/data communications.

  

To aid in the deployment of fiber in these security and surveillance networks, Transition Networks has specifically designed a copper to fiber media converter for analog video applications. These converters are available to support both fixed-focus cameras as well as pan-tilt-zoom (PTZ) cameras. As IP cameras begin to replace analog cameras, traditional Ethernet media converters can be used for the fiber integration. Most IP cameras also support power-over-Ethernet (PoE) technology which makes installation of the cameras easier since the camera can be powered over the UTP Ethernet cable. PoE switches, PoE injectors, and PoE media converters are all available to create the functional network needed in today’s hybrid video security and surveillance applications.

Also Visit: http://arindamcctvaccesscontrol.blogspot.in/2013/12/the-role-of-fiber-in-video-networks_1043.html

Tukang Ngeblog | June 21, 2014 | 100BASE-FX, 10BASE-T, CAT5, CAT6, Data Rs 485, fiber media, media converter, Patch Cord, PoE, Speed Dome, Terminating Box, UTP

Read More >>